Project Brupeg · vidéo

Ce que couvre cette vidéo

The owner of the 10-year rebuild project *Brupeg*, a former fishing trawler, fabricates a temporary exhaust stack and repairs the keel cooling system for a Kubota D1803 generator. To mount the muffler, he welds stainless steel straps to the body to minimize heat transfer to the engine mounts and adds a top brace to prevent resonance.0:46 Because the original muffler is mild steel, he coats the assembly in high-temperature ceramic paint to delay corrosion. He also addresses a leaking radiator cap assembly by silver soldering the stainless steel welds to ensure a seal.

The generator utilizes two schedule 40 steel keel cooling pipes that run under the hull to dissipate heat. After flushing stagnant water from the pipes, he attempts to connect them using silicone hoses and hose clamps, but the pitted, rusted surface of the steel pipes prevents a watertight seal. He abandons the hose clamp method in favor of welding custom steel fittings to create a permanent, leak-proof connection. The project concludes with the generator cooling system ready for coolant, though the owner plans to replace the temporary mild steel components with custom aluminum and stainless steel parts in the future.

Plus de vidéos de Project Brupeg

What caused the steering to fail - Project Brupeg Ep.463oct. 2026CHAOS! & our first Night Time Trailer Haul Out - Project Brupeg Ep.462sept. 2026Look, It's possible we should have cleaned this before now... Project Brupeg Ep.461sept. 2026The Ridiculously Powerful Davit Winch - Project Brupeg Ep.460sept. 2026

De Project Brupeg — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.