Sailing Uma · vidéo

Ce que couvre cette vidéo

The crew of the 36-ft boat Uma reinforces the V-berth hull by installing two-centimeter-thick fiberglass mini-ribs in a cross pattern to eliminate structural flexing during passages.1:40 After grinding the hull surface, they bond the ribs with fiberglass and epoxy to stiffen the laminate before applying insulation.2:16 The team also decides to mount the chain plates on the interior of the hull rather than the exterior, opting to reinforce the bulkhead areas with six layers of 400-gram biaxial fiberglass on each side.9:00 Before sealing the hull with insulation, the crew hand-writes the names of over 1,300 Patreon supporters directly onto the interior fiberglass surfaces, creating a permanent, hidden record of their contributors.12:36 They plan to photograph the names for documentation before covering them with insulation.21:11 Adding structural ribs and reinforcing chain plate bulkheads provides the necessary stiffness to prevent hull deformation in heavy seas.

Plus de vidéos de Sailing Uma

Solar Sponsor Backed Out Before Sailing Around the World !sept. 2026Our boat won’t look the same after this | Step 495août 2026The ONE Thing We Disagreed on This Entire Refit | Step 494août 2026We Owe You The Full Storyjuil. 2026

De Sailing Uma — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.