BoatworksToday · vidéo

Ce que couvre cette vidéo

Removing surface defects like dust, pollen, or bug strikes from a painted boat requires wet sanding followed by machine compounding.1:35 For buffable paints such as Alexseal 501 or Awlcraft 2000, begin by wet sanding the affected area with a sanding block, starting at 1,200 grit to remove the majority of defects, then progressing through 1,500 and 2,000 grit.3:35 Use a variable-speed rotary buffer, as random-orbit or jitterbug sanders lack the friction and heat necessary to polish paint.8:41 When compounding, match the pad and compound to the paint hardness; Awlcraft 2000 requires a foam compounding pad and 3M Finesse-It white-cap compound, while the harder Alexseal film demands more aggressive materials.7:00 Maintain a buffer speed of approximately 1,000 to 1,300 RPM, applying light pressure to avoid burning through the thin paint film.17:28 Apply small dollops of compound to the perimeter of the pad, starting at a 45-degree angle before flattening the pad to finish.19:03 Proper heat management prevents burning the finish, which would necessitate further repair.16:48

Plus de vidéos de BoatworksToday

I Was Wrong About My Boat's Victron Wiring (You Were Right!)sept. 2026Will This Entire Victron Electrical System Fit In My Little Boat?août 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!août 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!août 2026

De BoatworksToday — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.