Epiphany Sailingvidéo
Seawater Pro watermaker installed on C&C 39 Sailboat
23 juin 2023 · 17 min · 468 vues
Ce que couvre cette vidéo
Installing a SeaWater Pro modular watermaker on a C&C 39 requires custom plumbing and component placement to maximize limited storage space. The installation involves mounting a boost pump on the engine room bulkhead and a high-pressure pump on a custom-built platform over the propeller shaft area.2:10 To simplify maintenance, the system includes a T-valve for pickling and vibration isolators under the high-pressure pump to reduce noise and improve access to the oil drain plug.10:02 The crew routes hoses through bulkheads to connect 5-micron and 20-micron filters, a charcoal back-flush filter, and a freshwater flush timer.6:51 Because the system lacks a factory remote panel, the installer mounts gauges and controls directly into a cabin bulkhead.12:31 The final output connects to the existing water tank fill line using a spliced PVC fitting.14:28 The completed system produces 20 gallons per hour at 800–900 PSI, drawing approximately 1,000 watts through a 3,000-watt inverter powered by solar panels.16:24
Bateaux dans cette vidéo
Plus de vidéos de Epiphany Sailing
De Epiphany Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.
The Sailing Directory Newsletter
Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.