RAN Sailing · vidéo

Ce que couvre cette vidéo

Johan and Malin are reconfiguring the interior layout of their boat, specifically shifting two bulkheads 100 millimeters forward to increase space in the galley and the head shower compartment.1:47 The new layout positions the toilet lengthwise rather than sideways to improve floor space flow.4:39 To construct the interior, Johan fabricates custom bulkheads using PET foam, which he laminates with fiberglass using a vacuum bagging technique.9:21 He upgrades to a 12 cubic feet per minute vacuum pump to improve air evacuation and handle potential leaks during the lamination process.19:21 To create rounded corners for the bulkheads, he builds a mold using a section of pipe and plywood, then employs a kerf-bending technique on the foam to achieve a 100-millimeter inner radius.10:05 He uses a laser and center-line measurements to ensure the bulkheads are installed without twists.24:17 Vacuum bagging both sides of the foam simultaneously significantly speeds up the lamination process, though achieving a perfect 90-degree corner requires careful sealing of the mold to prevent vacuum leaks.32:01

Plus de vidéos de RAN Sailing

Something's Not Right Here! Building Our 52ft Sailboat - Ep. 502sept. 2026This Is Where Boat Builds Break People - Ep. 501 Ran Sailingaoût 2026Our 52ft Sailboat Build Reaches Another Milestone! - Ep. 500 Ran Sailingaoût 2026How Many Hatches Does a 52ft Sailboat Need? - Ep. 499 Ran Sailingaoût 2026

De RAN Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.