Eternal Sailing · vidéo

Ce que couvre cette vidéo

A couple hauls out their J42 catamaran in Pilada for a week of maintenance after two years in the water.11:24 The primary tasks include replacing old brass through-hull valves with TruDesign composite fittings and relocating the toilet seawater intake by one meter to prevent interference between the inlet and outlet.5:09 The owner uses a step drill bit to remove the old valves and fills the original hole with a wooden plug bonded with thickened epoxy before laminating over it with biaxial fiberglass.6:43 Additional repairs involve stripping and drying localized wet spots on the hull stringers and keel area, which are then treated with thinned epoxy and reinforced with biaxial cloth.13:00 The owner also addresses corrosion on the outboard motor’s power trim hydraulic housing, planning to clean and repaint the units to prevent further degradation.14:38 While inspecting the starboard hull, the owner identifies structural concerns near the keel that require further investigation.6:44

Bateaux dans cette vidéo

Plus de vidéos de Eternal Sailing

Even more rotten wood and a RAT on board?? What is going on here? 😟août 2026Can I fix ALL of this? 😟 Shipyard Part 2/2août 2026Exploring an abandoned industrial site 😯juin 2026We want to go on a long-distance cruise again! 😍 SO MUCH TO DO!! 🔧juin 2026

De Eternal Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.