Sven Yrvind · vidéo

Ce que couvre cette vidéo

Sven Yrvind constructs the base for a dual-keel system by laminating plywood layers to match a specific 20-degree outward cant.▶ 0:16 To achieve the required curvature, he employs a trial-and-error method, removing one centimeter of material at a time and tracing the profile repeatedly until the fit is precise.▶ 1:39 He uses a contour gauge acquired in 1971 to transfer the complex curves onto the wood.▶ 2:18 The base assembly measures 20 centimeters in width, designed to be cut into two separate keel foundations once the glue cures.▶ 2:52 Because he lacks clamps of sufficient length for the wide assembly, he secures the glued layers using wooden wedges to apply pressure across the joint.▶ 3:14 The process requires fitting multiple pieces tightly across three layers on both sides of the structure.▶ 2:27 Dividing complex construction problems into smaller, manageable tasks ensures structural accuracy when working with curved surfaces.

Plus de vidéos de Sven Yrvind

Kai the bow paddle.juil. 2026About safety.juil. 2026My solution to crossing the Doldrums without using an engine.juil. 2026Goose Barnacles Remower.juil. 2026

De Sven Yrvind — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.