Sven Yrvind · vidéo

Ce que couvre cette vidéo

Sven Yrvind fabricates and fits anchor-handling gear on his small boat, the 5.9. He rigs a rope-chain combination for the chain rode and a separate setup for the ordinary anchor, securing each with heavily stitched, strong-thread eyes at the ends.▶ 1:02 The chain rode's eye is sized large enough to double as a mooring line, useful where chafe against concrete docks would otherwise damage plain rope.▶ 0:38 A protruding shackle initially prevents flush seating against an adjacent fitting; Yrvind removes a screw and cuts the interfering piece away so the shackle sits flush with material remaining for a secure knot.▶ 2:37 The finished arrangement stows aft on a bungee.▶ 1:25 The practical point: sizing the rope-chain eye generously lets it serve both anchoring and mooring duties, reducing the need for separate lines in chafe-prone berths.

Plus de vidéos de Sven Yrvind

Kai the bow paddle.juil. 2026About safety.juil. 2026My solution to crossing the Doldrums without using an engine.juil. 2026Goose Barnacles Remower.juil. 2026

De Sven Yrvind — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.