Wildling Sailing · vidéo

Ce que couvre cette vidéo

Construction of engine mounts for a project catamaran involves fabricating custom 316 stainless steel brackets to clamp onto the vessel's beam.2:28 The design uses a pivoting mechanism where the engine box rotates on bolts rather than directly through the wood, preventing structural wear.18:14 To ensure durability, the boxes are sanded, cleaned with acetone, and coated with a hard-wearing epoxy paint.4:50 The current setup utilizes threaded rods for support, with plans to add cushioning and secondary stop wires to manage lateral movement and forward force.10:30 The owner intends to power the catamaran with two Yamaha 9.9 high-thrust four-stroke outboards, currently weighing the cost of new units against used engines found on the Dutch marketplace site Marktplaats.18:56 Future work includes preparing the raw wood mast beam and installing trampoline netting.19:41

Plus de vidéos de Wildling Sailing

One Step Back, One Step Sideways & One Step Forward | My Budget Catamaran Refitoct. 2026I Lifted Her Out For a Very Important Rebuild.sept. 2026One Final Refit Before Crossing The Atlantic.août 20262 Days Alone at Sea On my Primitive Double-Canoe.août 2026

De Wildling Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.