Wildling Sailing · video

What this video covers

Construction of engine mounts for a project catamaran involves fabricating custom 316 stainless steel brackets to clamp onto the vessel's beam.2:28 The design uses a pivoting mechanism where the engine box rotates on bolts rather than directly through the wood, preventing structural wear.18:14 To ensure durability, the boxes are sanded, cleaned with acetone, and coated with a hard-wearing epoxy paint.4:50 The current setup utilizes threaded rods for support, with plans to add cushioning and secondary stop wires to manage lateral movement and forward force.10:30 The owner intends to power the catamaran with two Yamaha 9.9 high-thrust four-stroke outboards, currently weighing the cost of new units against used engines found on the Dutch marketplace site Marktplaats.18:56 Future work includes preparing the raw wood mast beam and installing trampoline netting.19:41

More from Wildling Sailing

One Step Back, One Step Sideways & One Step Forward | My Budget Catamaran RefitOct 2026I Lifted Her Out For a Very Important Rebuild.Sept 2026One Final Refit Before Crossing The Atlantic.Aug 20262 Days Alone at Sea On my Primitive Double-Canoe.Aug 2026

From Wildling Sailing — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.