Sailing Uma · vidéo

Ce que couvre cette vidéo

The crew of the 36-ft sailboat *Uma* installs new deck hardware, including Lewmar Ocean hatches and Atlantic series portlights, to ensure a watertight cabin top.▶ 3:34 To minimize potential leak points, the crew mounts the hatches onto pre-fabricated G10 pedestals, allowing them to thread and bolt hardware directly into the G10 rather than drilling through-bolts into the deck.▶ 4:19 They seal the hardware using polyurethane sealant, specifically avoiding butyl tape, which they report failed over time by remaining soft and causing hardware to loosen.▶ 11:59 For corrosion resistance, the crew replaces original A2/304 stainless steel bolts with A4/316 grade hardware and applies Tefgel to all connections where stainless steel contacts aluminum.▶ 11:24 The installation process also includes re-polishing existing stainless steel components like the bow pulpit, stern arch, and handrails.▶ 15:12 When mounting the bow roller, the crew corrects misaligned holes by over-drilling into the plywood core, filling the voids with epoxy, and re-drilling to ensure a sealed, structural fit.▶ 21:33

Plus de vidéos de Sailing Uma

We Owe You The Full Storyjuil. 2026We Covered Our Boat in Solar. Is It Enough? | Step 492 (Part 3)juil. 2026Uma is Ready to Launch! (But there's a catch) | Step 489juin 2026How Many Sails Does it Take To Replace a Diesel Engine? | Step 488mai 2026

De Sailing Uma — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.