SmoCo Sailing · vidéo

Ce que couvre cette vidéo

The crew of SV Cosmo installs Lumitech Javelin underwater lights on the stern and Lumitech Quattro lights on the bow to improve nighttime visibility and safety.▶ 0:31 The installation requires drilling holes through the hull below the waterline, necessitating careful measurement from the inside to avoid fuel tanks, rudder components, and bulkheads.▶ 1:05 After drilling, the team scuffs the light housings with 80-grit sandpaper and applies 3M 5200 sealant to ensure a watertight bond.▶ 6:14 To prevent potential leaks, they reinforce the installation areas with fiberglass and epoxy from both the inside and outside of the hull.▶ 15:17 Wiring is routed through existing chases and connected to a spare DC panel, allowing for independent control of the bow and stern lights.▶ 17:40 The lights provide illumination beneath the surface, which helps the crew identify underwater obstructions when entering anchorages at night without the glare associated with deck-mounted spotlights.▶ 18:56

Plus de vidéos de SmoCo Sailing

[Ep 68] This Was Supposed to Be an Overnight Stop | Alcatraz Cove in Bahia de los Angelesjuin 2026[Ep 67] Cruising Life Reality: Spend a Passage Day With Us in Baja Mexicojuin 2026[Ep 66] Spearfishing Success & Baja's Abandoned Resort | Ensenada el Pescadorjuin 2026[Ep 65] Fishing Off A Sailboat...Four Fish Hooked In Baja | Bahia de los Angelesjuin 2026

De SmoCo Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.