Sailing Catalpavidéo

Switching out a propeller in the Water Episode 440

30 mars 2025 · 17 min · 175K vues · La Paz

Ce que couvre cette vidéo

The crew of Catalpa replaces a worn, vibrating Max-Prop with a 22-inch, 14-pitch fixed propeller while anchored in 3 meters of clear water near La Paz, Mexico.9:33 The original Max-Prop, set at an 18-degree pitch, caused engine overheating, failed to reach maximum RPM, and exhibited significant vibration due to electrolysis and worn internal fittings.3:36 To perform the underwater swap without hauling out, the crew uses a borrowed two-hose surface-supplied air system (hooker) to allow two divers to work simultaneously.10:10 After removing the Max-Prop with a puller and installing the fixed propeller, the crew modifies a mismatched nut to secure the assembly.12:11 Sea trials confirm the vibration is resolved, though the fixed propeller exhibits a "singing" noise at certain RPMs and results in a lower cruising speed of 6.4 knots compared to the previous 8 knots.17:01 Replacing a propeller in the water is a viable alternative to a haul-out when clear, shallow, current-free water is available.5:24

Regarder sur YouTube

Plus de vidéos de Sailing Catalpa

the clearest water we have ever seen...The Tuamotusoct. 2026arriving to the most remote atolls on earth...the Tuamotussept. 2026they weren't expecting thissept. 2026one of the most remote islands on the planetsept. 2026

De Sailing Catalpa — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.

Signaler un problème