Sail Life · vidéo

Ce que couvre cette vidéo

Mads fabricates replacement hatches for a 44-foot catamaran using vacuum infusion, balsa core, and fiberglass.0:29 He creates a template for the core by modifying existing test hatches, then cuts the balsa core with a knife to avoid the tear-out caused by a router.1:51 After cleaning the molds and applying wax and PVA mold release, he performs the infusion process.3:59 He uses a DIY post-curing oven constructed from insulation sheets, a temperature controller, and a space heater to cure the parts at 60 degrees Celsius for six hours.8:19 The project serves as a practice run for building a large cockpit hardtop.4:06 During the process, he encounters issues with an unreliable scale and a power outage, but successfully produces two hatches.7:15 He notes that the new hatches weigh approximately the same as the originals.20:18 Additionally, he integrates a Bambu Lab X1 Carbon 3D printer into his workflow to create custom tools, including fillet-forming tools and sanding blocks, for use on the boat.9:25

Bateaux dans cette vidéo

Plus de vidéos de Sail Life

The road back to boat work: We're gravel rich & ready for shipping containers! Ep. 694sept. 2026Can I build an aluminum fuel tank with the xTool MetalFab laser welder and CNC? Ep. 693août 2026The road back to boat work: shipping delays, site prep and bending metal with a 3D print Ep. 692août 2026The road back to boat work: Cutting trees, picking up plywood, and 240V in the shop. Ep. 691août 2026

De Sail Life — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.