Sail Lifevidéo
Can I build an aluminum fuel tank with the xTool MetalFab laser welder and CNC? Ep. 693
30 août 2026 · 18 min · 112K vues
Ce que couvre cette vidéo
The xTool MetalFab laser system, which combines CNC cutting, laser welding, and laser cleaning, serves as a new fabrication tool for refitting a 44-foot catamaran named Spiffy.0:20 After completing a mandatory safety course and unlocking the machine with a USB key, the setup process involves configuring the XTool Studio software and selecting appropriate gases for different materials.2:44 Compressed air serves as the primary gas for cutting aluminum and stainless steel, while low carbon steel requires pure oxygen for thicknesses exceeding two millimeters.5:12 The CNC features a 2x2 foot work area with side pass-throughs for longer stock.6:47
The laser welder offers significantly faster welding speeds than traditional TIG welding with a shallower learning curve.12:31 Testing on 2mm aluminum coupons confirms the machine can produce airtight welds, verified by a 3 psi pressure test following ABYC standards.16:08 The system enables the fabrication of custom brackets, backing plates, and fuel tanks, reducing reliance on external laser-cutting services.16:48 The project confirms the feasibility of using the MetalFab for constructing marine-grade aluminum fuel tanks.16:17
Bateaux dans cette vidéo
Plus de vidéos de Sail Life
De Sail Life — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.
The Sailing Directory Newsletter
Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.