Sail Life · vidéo

Ce que couvre cette vidéo

Mads prepares to vacuum infuse replacement hatches for a 44-foot catamaran by creating and testing MDF molds.0:17 After 3D scanning damaged original hatches, he constructs molds and coats them with epoxy, noting that cold Florida temperatures increase epoxy viscosity and require external heating.3:23 He uses a VAC checker to monitor vacuum integrity, identifying and troubleshooting leaks in the bagging process before performing a test infusion on a sample piece.11:44 The test confirms that TotalBoat high-performance epoxy can be used for infusion, though it lacks the low viscosity of dedicated infusion resins and requires careful temperature management to ensure proper flow.17:06 The test piece achieves a glass-to-resin ratio of approximately 60% to 40%, though minor dry spots occur due to insufficient flow media and resin viscosity.19:31 The project awaits the arrival of core materials to proceed with the final hatch fabrication.19:58

Bateaux dans cette vidéo

Plus de vidéos de Sail Life

The road back to boat work: We're gravel rich & ready for shipping containers! Ep. 694sept. 2026Can I build an aluminum fuel tank with the xTool MetalFab laser welder and CNC? Ep. 693août 2026The road back to boat work: shipping delays, site prep and bending metal with a 3D print Ep. 692août 2026The road back to boat work: Cutting trees, picking up plywood, and 240V in the shop. Ep. 691août 2026

De Sail Life — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.