BoatworksToday · vidéo

Ce que couvre cette vidéo

Andy installs a full Victron electrical suite into the V-berth of a 1970 Westwind Paceship 24, a 24-foot sailboat undergoing a complete refit. The system includes two 300-amp-hour Epic batteries and a Victron inverter-charger. To verify the layout in the confined space, he builds a physical mock-up using OSB templates to represent the battery bank and inverter footprints. The V-berth area measures approximately 6.5 feet in length and beam. Because the inverter-charger requires four inches of clearance on all sides for cooling, vertical mounting on the knee walls proved impossible. Andy decides to mount the unit horizontally in the center trunk area. To mitigate heat buildup from horizontal mounting, he plans to use a Victron Cerbo to trigger two DC computer fans, which will circulate air through the compartment and out a stainless louver. Accessory components, including the shunt and distributor, will mount on the outboard side of the knee walls behind removable access panels.

Bateaux dans cette vidéo

Plus de vidéos de BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?août 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!août 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajuil. 2026Fiberglassing The Bulkheads & Sole On My 1970 Westwind Paceship 24 Pocket Cruiser!juil. 2026

De BoatworksToday — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.