Sampson Boat Co · vidéo

Ce que couvre cette vidéo

Leo Goolden completes the rudder reinstallation on the 1910 gaff cutter Tally Ho, including trimming plugs, sealing the lifting hole, and applying anti-fouling paint.1:36 To address rapid sacrificial anode depletion, he installs an additional zinc anode on the hull near the propeller, electrically bonding it to the prop shaft inside the boat.7:00 He uses a G10 insulating sleeve to isolate the anode from the wooden hull, preventing the alkaline environment that can degrade lignin and weaken timber.8:05 The propeller receives a coating of Prop Speed, a silicone-based foul-release product, to minimize marine growth without biocides.2:52 Following these repairs, the boat is relaunched, and sea trials confirm the rudder operates smoothly.15:10 The project highlights the risks of over-protecting underwater metal fittings on wooden vessels, where excessive galvanic protection can cause structural wood failure.6:22 Proper anode sizing and placement require balancing corrosion protection against the preservation of surrounding timber.

Plus de vidéos de Sampson Boat Co

Tally Ho sails into England after 59 years overseas!août 2026A very brief update from the Fal estuaryaoût 2026Piracy and Peril - stories from the boatyards of West Corkaoût 2026Tally Ho completes her Atlantic Crossing at the Fastnet Rock!août 2026

De Sampson Boat Co — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.