Epiphany Sailingvidéo
Upgraded wires to 2/0 feeding our 3000 w inverter C&C 39
24 mai 2023 · 4 min · 144 vues
Ce que couvre cette vidéo
The electrical system on a C&C 39 requires an upgrade to 2/0 gauge cabling to support a 3,000-watt inverter and a 600-amp-hour battery bank.0:03 The previous cables proved insufficient for the increased power capacity, leading to potential voltage drop. Installing the heavier 2/0 wire necessitates enlarging existing bulkhead holes to accommodate the increased diameter.2:03 The installation follows the shortest possible route alongside the engine to minimize resistance and voltage loss, adhering to Ohm's law.1:56 A heavy-duty hydraulic crimper provides the necessary force to secure the custom-length cable fittings.1:10 After routing the cables to the positive and negative terminals of the inverter, the wires are secured with zip ties to prevent chafing or damage from engine vibration.3:05 Final testing confirms consistent voltage readings between the battery bank and the inverter, with solar input showing 220 watts.3:48 Using appropriately sized, custom-length cabling eliminates measurable voltage loss in high-draw inverter circuits.3:32
Bateaux dans cette vidéo
Plus de vidéos de Epiphany Sailing
De Epiphany Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.
The Sailing Directory Newsletter
Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.