RAN Sailing · video

Cosa tratta questo video

Johan and Malin construct the cockpit coamings and backrests for their boat, prioritizing structural symmetry between the port and starboard sides.▶ 13:12 The process involves laminating four large fiberglass panels using vacuum bagging, which requires 36 kilograms of glass and 30 kilograms of epoxy.▶ 5:11 Johan laminates two panels per vacuum bag to increase efficiency, utilizing a track saw to cut the straight-edged pieces after lamination.▶ 1:48 After prepping the materials, the team glues the coaming sections and backrest components into position.▶ 13:03 Achieving precise alignment between both sides proves time-consuming, requiring Johan to remove and reposition one panel to correct an angle discrepancy.▶ 16:27 The current build phase leaves the coamings with a boxy profile, with plans to add radii to the exterior edges and install the cockpit seats in a future session.▶ 17:07 The project consumes significant material, including 75 sheets of PTFOAM totaling 225 square meters for use in the deckhouse, transom, and interior components.▶ 11:14

Altro da RAN Sailing

Port Side Toe Rail & Deckhouse Carbon Corners - Ep. 494 Ran Sailinglug 2026The Boat Gets Its Edge - Ep. 493 Ran Sailinggiu 2026Opening Up The Deckhouse: The Last Window Cutout - Ep. 492 Ran Sailinggiu 2026The Last Major Lamination on Our 52ft Sailboat! - Ep. 491 Ran Sailinggiu 2026

Da RAN Sailing — guarda la barca, l'equipaggio e ogni video analizzato del canale.