Salt & Tar · video

Cosa tratta questo video

Garrett prepares the hull of the dinghy Little Red for fiberglassing by fairing the exterior and sealing the seams with epoxy.0:07 He uses TotalBoat Thixo in a caulking gun to apply spot-glued fillets, which hold the hull shape while allowing for the removal of temporary copper wire stitches.2:36 After the spot welds cure, he removes the wires, heats any embedded copper with a heat gun for extraction, and applies full epoxy beads to the seams.2:50 He fills the mortise and tenon joints for the frames and sands the hull to remove high spots.1:24 To ensure structural integrity for a cruising dinghy, he plans to fiberglass the entire exterior, exceeding the original build plans.12:44 He stabilizes the hull on sawhorses to prevent twisting before applying the first layer of fiberglass cloth.14:14 He uses tape lines to create clean edges for the fiberglass overlaps and prepares to trim the excess material with a razor blade.14:32

Altro da Salt & Tar

Salt & Tar: Ep.361- IN-THE-WATER Surveyott 2026Meet Victoria - Tour of our William Garden 'Porpoise' built by Robin Fung in 1975ott 2026Salt & Tar: Ep.360- Good Newsott 2026Salt & Tar: Ep.359- Memory Laneset 2026

Da Salt & Tar — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.