Salt & Tar · vídeo

O que este vídeo aborda

Garrett prepares the hull of the dinghy Little Red for fiberglassing by fairing the exterior and sealing the seams with epoxy.0:07 He uses TotalBoat Thixo in a caulking gun to apply spot-glued fillets, which hold the hull shape while allowing for the removal of temporary copper wire stitches.2:36 After the spot welds cure, he removes the wires, heats any embedded copper with a heat gun for extraction, and applies full epoxy beads to the seams.2:50 He fills the mortise and tenon joints for the frames and sands the hull to remove high spots.1:24 To ensure structural integrity for a cruising dinghy, he plans to fiberglass the entire exterior, exceeding the original build plans.12:44 He stabilizes the hull on sawhorses to prevent twisting before applying the first layer of fiberglass cloth.14:14 He uses tape lines to create clean edges for the fiberglass overlaps and prepares to trim the excess material with a razor blade.14:32

Mais de Salt & Tar

Salt & Tar: Ep.360- Good News10/2026Salt & Tar: Ep.359- Memory Lane09/2026Salt & Tar: Ep.358- Sad News09/2026Salt & Tar: Ep.357- Finishing What We Started09/2026

De Salt & Tar — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.