Salt & Tar · vidéo

Ce que couvre cette vidéo

Garrett prepares the hull of the dinghy Little Red for fiberglassing by fairing the exterior and sealing the seams with epoxy.0:07 He uses TotalBoat Thixo in a caulking gun to apply spot-glued fillets, which hold the hull shape while allowing for the removal of temporary copper wire stitches.2:36 After the spot welds cure, he removes the wires, heats any embedded copper with a heat gun for extraction, and applies full epoxy beads to the seams.2:50 He fills the mortise and tenon joints for the frames and sands the hull to remove high spots.1:24 To ensure structural integrity for a cruising dinghy, he plans to fiberglass the entire exterior, exceeding the original build plans.12:44 He stabilizes the hull on sawhorses to prevent twisting before applying the first layer of fiberglass cloth.14:14 He uses tape lines to create clean edges for the fiberglass overlaps and prepares to trim the excess material with a razor blade.14:32

Plus de vidéos de Salt & Tar

Salt & Tar: Ep.361- IN-THE-WATER Surveyoct. 2026Meet Victoria - Tour of our William Garden 'Porpoise' built by Robin Fung in 1975oct. 2026Salt & Tar: Ep.360- Good Newsoct. 2026Salt & Tar: Ep.359- Memory Lanesept. 2026

De Salt & Tar — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.