Sailing Zephyr IVvideo
This Engineering Marvel Saved My Sailing Season
8 giugno 2024 · 4 min · 1K visualizzazioni · Portsmouth Harbour
Cosa tratta questo video
Dave replaces the fixed 17-inch three-bladed propeller on Zephyr IV, a Westerly Yachts hull designed by Ed Dubois, with a three-bladed Featherstream folding propeller made by Darglo.0:26 The decision followed seeing a Featherstream on a boat at Victoria Quay, where owner Nick of Tenacious Covers praised its performance.0:35 Dave drove to Darglo's facility in Wareham to hand-deliver the old prop and fixing nut so Darglo could replicate the shaft taper.1:06 Installer Mark of Now Marine fitted the new propeller, paying close attention to key-slot clearance and shaft-thread fit as Darglo specified.1:56 Sea trials in Portsmouth Harbour showed Zephyr IV reaching maximum hull speed at around 2,600 rpm, with minimal prop walk in reverse and more precise stern steering than before.2:42 Under sail the following day, feathering required stopping shaft rotation by engaging astern, after which the blades folded and the shaft stopped turning.3:07 In moderate winds the boat rarely dropped below 6 knots and often exceeded 7.3:21 The ambassador rope cutter was cleaned and retained on the shaft.1:39 Reduced drag from a folding propeller produces measurable speed gains even in moderate winds, with the added benefit of cleaner astern handling.
Barche in questo video
Altro da Sailing Zephyr IV
Da Sailing Zephyr IV — guarda la barca, l'equipaggio e ogni video analizzato del canale.
The Sailing Directory Newsletter
Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.



