MJ Sailingvideo
Building Our Custom Helm Seat - Foam, Glass & Vacuum Bagging (MJ Sailing - Ep 364)
2 agosto 2025 · 17 min · 45K visualizzazioni · Kent Island
Cosa tratta questo video
A custom helm seat is constructed from Nidicor honeycomb foam and high-density foam, reinforced with 12-ounce double-bias fiberglass and Total Boat polyester resin.▶ 0:31 To ensure structural integrity, the builders apply fillets at all 90-degree seams before laminating, as sharp corners prevent fiberglass cloth from laying flat without air bubbles.▶ 4:16 The assembly process utilizes vacuum bagging to consolidate the layers, with absorbent cloth placed over the glass to manage excess resin.▶ 1:30 Support beams are fabricated separately using two layers of 12-ounce biaxial fiberglass and two layers of 17-ounce unidirectional fiberglass to achieve rigidity while maintaining a low total weight of approximately 25 pounds.▶ 6:14 The builders note that laminating foam sheets before cutting them into individual pieces prevents edge tearing and improves overall accuracy.▶ 2:51 After assembly, the seat undergoes extensive fairing and priming to achieve a finished surface.▶ 11:04
Altro da MJ Sailing
Da MJ Sailing — guarda la barca, l'equipaggio e ogni video analizzato del canale.
The Sailing Directory Newsletter
Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.