Hanging Dinghy and patching bottom leak

Name: Hanging Dinghy and patching bottom leak
Uploaded: 2025-11-20T17:46:22.000Z
Duration: 15 min 49 s
Description: A cruiser repairs dinghy floor tears using 3M 5200, rubber patches, and fiberglass while at anchor.

20. november 2025 · 15 min · 76 visninger · Stocking Island

Hva denne videoen dekker

A C&C Yachts 39 owner repairs tears in an aluminum-floor dinghy while at anchor in the Bahamas. The floor leaks due to abrasion against the aluminum ribs caused by beaching and davit contact.1:31 The repair involves wire-brushing the damaged areas, applying 3M 5200 adhesive sealant between the floor and aluminum, and covering the tears with thick rubber patches reinforced by fiberglass matting.5:32 When 3M 5200 supplies run low, the owner supplements the repair with E6000 adhesive and a multi-purpose cement.9:47 The dinghy remains hoisted on the davits during the process to allow access from the swim platform.2:36 After an hour of curing, the dinghy is lowered and remains dry.11:54 To prevent future damage, the owner secures the dinghy with a three-point system consisting of two ropes and a chain to minimize movement against the davits.14:50 The owner also notes the process for ordering marine supplies to the Bahamas via Amazon and DHL.10:00