BoatworksToday · video

Hva denne videoen dekker

Andy resumes the restoration of a 1972 Bertram Moppy 25, a project previously stalled for several years.0:26 The boat, originally equipped with twin inboards, features an aftermarket Armstrong bracket for twin outboards.2:31 Initial structural repairs focused on the foredeck, which suffered from severe flexing and stress cracking due to poor previous workmanship involving 5200 sealant and screws.4:11 Andy removed the compromised sections and reinforced the deck with two full layers of 1708 fiberglass cloth.9:03 Future work will target the cockpit and transom before finalizing the interior layout.12:55 Before resuming lamination, Andy tests the shelf life of stored polyester laminating resin and gel coat by mixing small batches catalyzed at 2% with MAC hardener.14:57 He confirms the materials cure properly despite being stored for approximately one year.18:34 The project strategy prioritizes completing all structural fiberglass work across the entire vessel before beginning any cosmetic finishing.9:22

Mer fra BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?aug. 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!aug. 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!aug. 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajuli 2026

Fra BoatworksToday – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.