BoatworksToday · video

What this video covers

Andy resumes the restoration of a 1972 Bertram Moppy 25, a project previously stalled for several years.0:26 The boat, originally equipped with twin inboards, features an aftermarket Armstrong bracket for twin outboards.2:31 Initial structural repairs focused on the foredeck, which suffered from severe flexing and stress cracking due to poor previous workmanship involving 5200 sealant and screws.4:11 Andy removed the compromised sections and reinforced the deck with two full layers of 1708 fiberglass cloth.9:03 Future work will target the cockpit and transom before finalizing the interior layout.12:55 Before resuming lamination, Andy tests the shelf life of stored polyester laminating resin and gel coat by mixing small batches catalyzed at 2% with MAC hardener.14:57 He confirms the materials cure properly despite being stored for approximately one year.18:34 The project strategy prioritizes completing all structural fiberglass work across the entire vessel before beginning any cosmetic finishing.9:22

More from BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?Aug 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!Aug 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!Aug 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security CameraJul 2026

From BoatworksToday — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.