BoatworksToday · video

What this video covers

Andy resumes the restoration of a 1972 Bertram Moppy 25, a project previously stalled for several years.0:26 The boat, originally equipped with twin inboards, features an aftermarket Armstrong bracket for twin outboards.2:31 Initial structural repairs focused on the foredeck, which suffered from severe flexing and stress cracking due to poor previous workmanship involving 5200 sealant and screws.4:11 Andy removed the compromised sections and reinforced the deck with two full layers of 1708 fiberglass cloth.9:03 Future work will target the cockpit and transom before finalizing the interior layout.12:55 Before resuming lamination, Andy tests the shelf life of stored polyester laminating resin and gel coat by mixing small batches catalyzed at 2% with MAC hardener.14:57 He confirms the materials cure properly despite being stored for approximately one year.18:34 The project strategy prioritizes completing all structural fiberglass work across the entire vessel before beginning any cosmetic finishing.9:22

More from BoatworksToday

Why Is My 920Ah Sailboat Battery Bank So Big FOR THIS TINY SAILBOAT?? This Is Why ;-)!Oct 2026New Epoch Batteries Just Landed for My Victron System But It's On Hold For Annapolis Boat Show Prep!Sept 2026I Was Wrong About My Boat's Victron Wiring (You Were Right!)Sept 2026Will This Entire Victron Electrical System Fit In My Little Boat?Aug 2026

From BoatworksToday — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.