Sailing Suria · video

Hva denne videoen dekker

The owner of a Lagoon 410 S2 performs a DIY maintenance overhaul on two Yanmar SD50 saildrives.0:03 The process involves removing the propeller and the bearing housing to inspect and replace the radial shaft seals (simmerrings) and O-rings.1:22 After draining the saildrive oil, the technician uses a knife blade and flat-head screwdrivers to carefully pry the bearing housing from the saildrive body, taking care not to damage the aluminum flange.3:40 The shaft is removed to inspect the gear teeth and bearings, which show no signs of wear.8:43 To address calcification and wear grooves on the shaft where the seals seat, the technician shifts the position of the new seals by approximately 2 millimeters to ensure they ride on an undamaged surface.9:55 New Viton-material seals are installed back-to-back, with the open sides facing the medium they are intended to seal—water on the outside and oil on the inside.18:49 The technician uses a custom-cut PE spacer to achieve the desired seal depth and applies marine-grade winch grease to the assembly.16:50

Båter i denne videoen

Mer fra Sailing Suria

Last days in Madeira with a dream Levada – then off to the Canaries! ⛵🌊 #sailing #boatlife #atlanticokt. 2026High waves at the Cape and tropical paradise in Madeirasep. 2026Sailing to Funchal - adventurous bus ride - new anchor app #boatlife #anchorappsep. 2026Foot injury! Anchoring off the dreamlike coast of Madeira #sailing #sailing #boatlifeaug. 2026

Fra Sailing Suria – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.