Sailing Suria · vídeo

Qué cubre este vídeo

The owner of a Lagoon 410 S2 performs a DIY maintenance overhaul on two Yanmar SD50 saildrives.0:03 The process involves removing the propeller and the bearing housing to inspect and replace the radial shaft seals (simmerrings) and O-rings.1:22 After draining the saildrive oil, the technician uses a knife blade and flat-head screwdrivers to carefully pry the bearing housing from the saildrive body, taking care not to damage the aluminum flange.3:40 The shaft is removed to inspect the gear teeth and bearings, which show no signs of wear.8:43 To address calcification and wear grooves on the shaft where the seals seat, the technician shifts the position of the new seals by approximately 2 millimeters to ensure they ride on an undamaged surface.9:55 New Viton-material seals are installed back-to-back, with the open sides facing the medium they are intended to seal—water on the outside and oil on the inside.18:49 The technician uses a custom-cut PE spacer to achieve the desired seal depth and applies marine-grade winch grease to the assembly.16:50

Barcos en este vídeo

Más de Sailing Suria

Last days in Madeira with a dream Levada – then off to the Canaries! ⛵🌊 #sailing #boatlife #atlanticoct 2026High waves at the Cape and tropical paradise in Madeirasept 2026Sailing to Funchal - adventurous bus ride - new anchor app #boatlife #anchorappsept 2026Foot injury! Anchoring off the dreamlike coast of Madeira #sailing #sailing #boatlifeago 2026

De Sailing Suria — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.