BoatworksToday · video

Hva denne videoen dekker

Andy of BoatworksToday applies a barrier coat to the bilge area of a sailboat to seal the fiberglass and simplify future cleaning.1:07 After fairing the keel to a flat finish, he prepares the bilge by vacuuming and cleaning it with a de-waxer.0:10 He selects Total Protect by Total Boat for its moisture-sealing properties and long recoat window.2:57 He mixes the barrier coat at a three-to-one ratio of base to catalyst, allowing for a 15-minute induction time before adding up to 10% reducer to achieve a creamy consistency.3:49 He applies three coats, allowing sufficient drying time between applications to avoid solvent trap, which can cause blistering.15:54 He uses a portable air scrubber in the forward hatch to manage fumes during the process.14:27 The barrier coat provides a durable, smooth surface in the bilge, serving as a final preparation step before installing the cabin sole and bulkheads.2:00

Mer fra BoatworksToday

Why Is My 920Ah Sailboat Battery Bank So Big FOR THIS TINY SAILBOAT?? This Is Why ;-)!okt. 2026New Epoch Batteries Just Landed for My Victron System But It's On Hold For Annapolis Boat Show Prep!sep. 2026I Was Wrong About My Boat's Victron Wiring (You Were Right!)sep. 2026Will This Entire Victron Electrical System Fit In My Little Boat?aug. 2026

Fra BoatworksToday – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.