BoatworksToday · video

What this video covers

Andy of BoatworksToday applies a barrier coat to the bilge area of a sailboat to seal the fiberglass and simplify future cleaning.1:07 After fairing the keel to a flat finish, he prepares the bilge by vacuuming and cleaning it with a de-waxer.0:10 He selects Total Protect by Total Boat for its moisture-sealing properties and long recoat window.2:57 He mixes the barrier coat at a three-to-one ratio of base to catalyst, allowing for a 15-minute induction time before adding up to 10% reducer to achieve a creamy consistency.3:49 He applies three coats, allowing sufficient drying time between applications to avoid solvent trap, which can cause blistering.15:54 He uses a portable air scrubber in the forward hatch to manage fumes during the process.14:27 The barrier coat provides a durable, smooth surface in the bilge, serving as a final preparation step before installing the cabin sole and bulkheads.2:00

More from BoatworksToday

Why Is My 920Ah Sailboat Battery Bank So Big FOR THIS TINY SAILBOAT?? This Is Why ;-)!Oct 2026New Epoch Batteries Just Landed for My Victron System But It's On Hold For Annapolis Boat Show Prep!Sep 2026I Was Wrong About My Boat's Victron Wiring (You Were Right!)Sep 2026Will This Entire Victron Electrical System Fit In My Little Boat?Aug 2026

From BoatworksToday — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.