BoatworksToday · vídeo

Qué cubre este vídeo

Andy of BoatworksToday applies a barrier coat to the bilge area of a sailboat to seal the fiberglass and simplify future cleaning.▶ 1:07 After fairing the keel to a flat finish, he prepares the bilge by vacuuming and cleaning it with a de-waxer.▶ 0:10 He selects Total Protect by Total Boat for its moisture-sealing properties and long recoat window.▶ 2:57 He mixes the barrier coat at a three-to-one ratio of base to catalyst, allowing for a 15-minute induction time before adding up to 10% reducer to achieve a creamy consistency.▶ 3:49 He applies three coats, allowing sufficient drying time between applications to avoid solvent trap, which can cause blistering.▶ 15:54 He uses a portable air scrubber in the forward hatch to manage fumes during the process.▶ 14:27 The barrier coat provides a durable, smooth surface in the bilge, serving as a final preparation step before installing the cabin sole and bulkheads.▶ 2:00

Más de BoatworksToday

I Wasn't Sure This Would Work | 42 Hour BBQ on Solar Power | Jackery HomePower 3600 Plus!jul 2026Everything Fits! ~ Coosa Bulkheads, New Soles & Closing Out The Old Thruhulls!jun 2026Giraffe Tools x Boatworks | Bringing a 56-Year-Old Sailboat Back To Life!may 2026Weeks Of Grinding Fiberglass Led To This Boat Restoration Moment!may 2026

De BoatworksToday — mira el barco del canal, la tripulación y cada vídeo analizado.