BoatworksToday · video

What this video covers

Andy of BoatworksToday applies a barrier coat to the bilge area of a sailboat to seal the fiberglass and simplify future cleaning.1:07 After fairing the keel to a flat finish, he prepares the bilge by vacuuming and cleaning it with a de-waxer.0:10 He selects Total Protect by Total Boat for its moisture-sealing properties and long recoat window.2:57 He mixes the barrier coat at a three-to-one ratio of base to catalyst, allowing for a 15-minute induction time before adding up to 10% reducer to achieve a creamy consistency.3:49 He applies three coats, allowing sufficient drying time between applications to avoid solvent trap, which can cause blistering.15:54 He uses a portable air scrubber in the forward hatch to manage fumes during the process.14:27 The barrier coat provides a durable, smooth surface in the bilge, serving as a final preparation step before installing the cabin sole and bulkheads.2:00

More from BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?Aug 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!Aug 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!Aug 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security CameraJul 2026

From BoatworksToday — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.