Sven Yrvind · video

Hva denne videoen dekker

Sven Yrvind installs a structural component on his small boat, Buumkin, using 154 kilograms of lead weights to test the fit and positioning.0:54 He removes stubborn peel ply from the fiberglass surface using clamps, chisels, and pliers.1:43 After aligning the part, he secures it with thickened epoxy fillets to create a strong bond.2:09 The installation serves as a mounting point for the mast, sheeting, and anchor chain roller.2:34 Yrvind notes that while anchoring from a bowsprit is generally discouraged on larger vessels, the small size and high structural strength of this boat make the configuration viable.2:46 He applies tape to the assembly to prevent epoxy ingress and plans to reinforce the joint with additional glass fiber once the initial cure is complete.3:10 He removes the temporary alignment aids before the epoxy fully sets to ensure the hardware remains functional.3:16

Mer fra Sven Yrvind

Headlamps and flags.aug. 2026Working on the Sheets.aug. 2026A Visit from Tom Cunliffe.aug. 2026Adding halyards.aug. 2026

Fra Sven Yrvind – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.