Sailing Uma · vídeo

O que este vídeo aborda

The owners of a boat under refit pressure-tested their newly installed freshwater system, which includes a hot water tank, PEX plumbing, and a 12-volt Jabsco Par-Max five-diaphragm water pump.▶ 0:14 The test revealed two minor leaks at threaded fittings, which were resolved with thread sealant tape.▶ 9:40 However, the pump generated 80 to 86 decibels of noise, causing significant vibration through the bulkhead where it was mounted.▶ 8:17 Attempts to isolate the pump using flexible hose and foam matting failed to reduce the noise, as the bulkhead acted as an acoustic chamber.▶ 13:47 The owners determined that the diaphragm-style pump’s mechanical vibration is incompatible with its current bulkhead mounting location.▶ 14:34 They plan to research and test alternative, quieter pump technologies to replace the current unit.▶ 15:21 The pressure test confirmed that the PEX plumbing runs and other system components are otherwise sound and leak-free.▶ 16:40

Mais de Sailing Uma

Uma is Ready to Launch! (But there's a catch) | Step 489jun. de 2026How Many Sails Does it Take To Replace a Diesel Engine? | Step 488mai. de 2026Turning Our Powerboat Back Into a Sailboat | Step 487mai. de 2026We Cut our Mast in Half | Step 486mai. de 2026

De Sailing Uma — veja o barco, a tripulação e cada vídeo analisado do canal.