kentblairlvídeo
Alcort Super Sailfish Handrails
16 de junho de 2020 · 5 min · 90 visualizações
O que este vídeo aborda
Kent Blair fabricates replacement handrails for an Alcort Super Sailfish using 3/4-inch thick cypress stock.Watch The process begins by cutting the wood to 41-inch lengths and ripping the boards to a width of 1 5/8 inches.1:02 Using a factory-original handrail as a template, the shape is traced onto the blanks.2:00 A jigsaw removes the corners and cuts out the handholds, while a router with a round-over bit softens the edges that a sailor grips.2:41 The bottom surface remains flat and square for deck mounting.3:28 After sanding with 120-grit discs, the rails are ready for finishing.3:44 When installing, old fastener holes in the deck should be filled with thickened epoxy before drilling new ones.4:28 Fasteners, typically number 10 screws at 2 1/2 inches long, must be offset toward the center of the rail ends to ensure they bite into the structural wood beneath the deck.4:50
Barcos neste vídeo
Mais de kentblairl
De kentblairl — veja o barco, a tripulação e cada vídeo analisado do canal.
The Sailing Directory Newsletter
Um e-mail com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira seu endereço para receber sua própria cópia.