Living For Sail · vídeo

O que este vídeo aborda

To fabricate custom fiberglass housings for deck prisms on the 30-foot sailboat Antidote, the owner constructs a mold using a glass prism and trim ring as a plug.0:06 He coats the mold with Duratec 707 polyester primer to create a smooth, sandable surface, applying it with a spray gun powered by an 80-gallon, two-stage air compressor.1:05 After addressing surface pinholes with spot repairs, he applies four layers of Partall No.12:26 2 paste wax followed by a PVA release agent.16:51 The layup process uses 12-ounce fiberglass tape and milled fibers for tight corners, initially attempted with polyester resin.20:15 Vacuum bagging fails to adequately compact the fiberglass into the complex geometry, resulting in voids and poor adhesion.23:33 The owner concludes that the polyester resin’s short open window and the chosen fiberglass weight are unsuitable for this application, suggesting that epoxy resin or a vacuum infusion process would yield better results.24:22

Barcos neste vídeo

Mais de Living For Sail

This Was Inside The Boat!? — Should I Put It Back?set. de 2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boatago. de 2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!jul. de 2026⛵️ This DIY Sailboat Repair Has To Work... Right?jun. de 2026

De Living For Sail — veja o barco, a tripulação e cada vídeo analisado do canal.

The Sailing Directory Newsletter

Um e-mail com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira seu endereço para receber sua própria cópia.