RAW AND UNEDITED OVERHEAD FIBERGLASSING DEMONSTRATION - (Episode 353)
1 de março de 2026 · 24 min · 127K visualizações · Rebak Island, Langkawi
Crew fibers glassing boat under tent at dawn
O que este vídeo aborda
The crew of a Lagoon 450 repairs a section of the hull from the transom to the keel by applying four layers of biaxial fiberglass.▶ 0:13 To manage the curing time in high temperatures, the team uses Total Boat Epoxy with a slow hardener, mixing it in 1.5-liter batches and transferring the resin into smaller containers to prevent premature kicking.▶ 2:01 The process involves wetting out the hull surface before applying pre-cut, numbered, and rolled fiberglass sheets to ensure precise placement.▶ 3:41 The team uses an air roller to remove trapped air bubbles and distribute excess resin, noting that any air pockets would require grinding out the cured laminate.▶ 5:09 When the fiberglass cloth stretches during application, the crew cuts small filler strips to maintain the required four-layer thickness.▶ 18:45 The repair addresses a localized area of blistering along the centerline, which the crew distinguishes from previous hurricane-related damage.▶ 3:10 The project concludes with the final tie-in to the keel, followed by the transition to the fairing stage.▶ 20:32
Barcos neste vídeo
Mais de Sailing Parlay Revival
De Sailing Parlay Revival — veja o barco, a tripulação e cada vídeo analisado do canal.