Be The Captain · vídeo

O que este vídeo aborda

James Evenson commissions hull number nine of the Bluewater 56 (FRERS), a cutter-rigged masthead sloop, and documents the problems found before the first sail.▶ 13:21 The most significant factory defect: the windlass solenoid was missing entirely — no 24-volt solenoid installed in the circuit, leaving the anchor unable to be deployed.▶ 1:23 Evenson sources a replacement solenoid rated for an 800–3,500-watt windlass, installs it, and confirms the windlass works.▶ 2:20 A second factory wiring error had the electric furler routed to the wrong circuit; Evenson swaps the wiring to correct it.▶ 7:10 The Selden electric furler junction box installation is detailed, including use of a Hensel waterproof enclosure with O-ring seal and terminal block, routed through the sail locker.▶ 0:22 A rigging crew tunes the Selden rig over two days using a digital tension gauge, with the expectation of construction stretch requiring further adjustment underway.▶ 3:14 The first sail confirms the rig is close but notes the V3 and forestay need fine-tuning.▶ 9:33 A detailed walkthrough covers the boat's three-per-side chainplates, Simpson davits, Garmin nav station, cedar-lined lockers, custom Corian counters, Manship hatches, partially skeg-hung rudder, and a forward V-berth with washing machine and watermaker.▶ 13:53 A missing solenoid can ground a new boat at commissioning — test every system before the anchor leaves the dock.

Barcos neste vídeo

Mais de Be The Captain

The Brutal Truth About Cruising on a Budget & Surviving Storms at Seajul. de 2026How He Survived a Tropical Storm at Seajun. de 2026He Did Everything Right. His Captain Still Blamed Him.jun. de 2026How to Price a Sailboat: The Step-By-Step Audit YOU Can Domai. de 2026

De Be The Captain — veja o barco, a tripulação e cada vídeo analisado do canal.