MJ Sailing · vídeo

O que este vídeo aborda

Installation of structural support beams on the cabin top requires precise alignment and bonding to manage compression loads from the mast and traveler. The crew installs a centerline beam to prevent the forward bulkhead from pulling toward the mast under tension from halyards and winches.1:28 Before bonding, they run electrical conduit for lighting and solar wiring through the beams, using string to pull the lines through before the tubes are permanently fixed.7:26 They use methacrylate adhesive to bond the beams to the fiberglass cabin top, applying two large beads along the six-inch flanges to ensure full coverage and structural integrity.13:44 Jack stands provide upward pressure to hold the beams in place during the 90-minute curing window.15:20 After the beams set, the crew identifies a missing backing plate for the aft traveler support, necessitating a future cutout and repair.17:04 Proper preparation of the fiberglass surface by sanding and keying is essential for the adhesive to bond effectively.5:45

Mais de MJ Sailing

The Ultimate Off-Grid Upgrade: Unboxing 8 Lithium Batteries!10/2026How Can a Light Switch Be SO COMPLICATED??!! (MJ Sailing - Episode 381)08/2026Painting the Accent Walls On Our Home Built Catamaran (MJ Sailing - Episode 380)07/2026The Details That Keep a Boat Dry (MJ Sailing - Episode 379)06/2026

De MJ Sailing — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.