The Sailing Brothersvideo
How We Made Our Own Hookah Dive System / DIY PROJECTS At your own risk!
September 25, 2024 · 6 min · 48K views
What this video covers
Adam and Luke, full-time cruisers on a budget, build a DIY hookah dive system to clean growth — described as "keroth" and barnacles — off their boat's hull instead of paying £1,500–$1,800 USD for a commercial unit.1:37 The build uses a 150-litre-per-minute, 12-volt oilless electric compressor (cost: roughly £100), 10 metres of standard hookah hose from a dive shop, an inline fuel filter to catch compressor particles, and a dive-shop regulator.1:57 Crocodile-clip extensions connect the compressor to the boat's batteries.2:58 Both brothers test the system in the water; it sustains bottom-cleaning sessions of 15–20 minutes at a stretch, with a total in-water time of about 90 minutes on one charge.6:09 The main limitation is airflow: the diver must suck hard to draw enough air through the hose, and the brothers recommend buying a larger compressor if space allows.6:40 The inline filter is flagged as essential even with an oilless compressor.2:28 Total build cost is a fraction of commercial hookah units, and the system is presented as functional but with the explicit caveat of use at your own risk.
Boats in this video
More from The Sailing Brothers
From The Sailing Brothers — see the channel’s boat, crew, and every analyzed video.
The Sailing Directory Newsletter
One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.



