Be The Captain · video

What this video covers

Upgrading a coastal cruiser like a C&C 35 Mark II for offshore sailing requires structural reinforcement and system hardening. Replace original chain plates and upgrade standing rigging to 316 1x19 wire or die-form.1:20 Install backing plates for all deck hardware, particularly stanchions, to prevent them from ripping out under heavy water loads.1:45 Beef up the rudder system by installing a stronger quadrant, replacing Delrin rudder bearings, and adding an emergency tiller.2:15 While watertight bulkheads forward of the rudder post provide critical protection against flooding from debris strikes, they remain cost-prohibitive for most production boats.5:55 Instead, prioritize a strong rudder, a skeg, and a high-capacity bilge pump.6:18 For sail configuration, ensure the boat carries a storm sail or trisail and at least three or four reefs in the main.3:22 When choosing between in-mast furling and slab reefing for offshore work, slab reefing remains the preferred choice among experienced cruisers for its reliability and simplicity in heavy weather.15:07

Boats in this video

More from Be The Captain

25 People Abandoned an Unsinkable Ship. None Survived | The Joyita MysterySep 202631 Crew Sailed Into Hurricane Mitch. None Were Ever Found | The Tragic Story of SV FantomeAug 2026Declared Dead at Sea — Then They Came Back | The Rose-Noëlle StoryJul 2026My Final Video as Sailing ZingaroJul 2026

From Be The Captain — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.