Be The Captainvídeo
Upgrading a Coastal Cruiser for Offshore Sailing
15 de outubro de 2024 · 16 min · 100K visualizações
O que este vídeo aborda
Upgrading a coastal cruiser like a C&C 35 Mark II for offshore sailing requires structural reinforcement and system hardening. Replace original chain plates and upgrade standing rigging to 316 1x19 wire or die-form.1:20 Install backing plates for all deck hardware, particularly stanchions, to prevent them from ripping out under heavy water loads.1:45 Beef up the rudder system by installing a stronger quadrant, replacing Delrin rudder bearings, and adding an emergency tiller.2:15 While watertight bulkheads forward of the rudder post provide critical protection against flooding from debris strikes, they remain cost-prohibitive for most production boats.5:55 Instead, prioritize a strong rudder, a skeg, and a high-capacity bilge pump.6:18 For sail configuration, ensure the boat carries a storm sail or trisail and at least three or four reefs in the main.3:22 When choosing between in-mast furling and slab reefing for offshore work, slab reefing remains the preferred choice among experienced cruisers for its reliability and simplicity in heavy weather.15:07
Barcos neste vídeo
Mais de Be The Captain
De Be The Captain — veja o barco, a tripulação e cada vídeo analisado do canal.
The Sailing Directory Newsletter
Um e-mail com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira seu endereço para receber sua própria cópia.



