Huub Vlogs · video

What this video covers

Huub replaces the upper and lower seals on Yanmar saildrives to prevent water ingress and oil leaks.3:17 The process begins by removing the propeller and the cone, then draining the gear oil.0:05 After cleaning the internal components with diesel and 150-grit sandpaper, the crew installs two new lower seals in opposing orientations—one with the opening facing down and the other facing up—to ensure a proper barrier.4:08 The team replaces the zinc anodes and applies marine lithium grease to the assembly.6:07 To access the upper seal, the crew disconnects the throttle cable, wiring, and engine mount bolts, then shifts the engine aft to extract the saildrive unit.7:37 After scraping away old sealant from the hull interface, they prime the bare aluminum with Etsy primer and apply PrimoComp and Trilux 33 anti-fouling paint.11:40 The unit is reinstalled with fresh sealant and the engine is realigned to reconnect the shaft.13:12

More from Huub Vlogs

The Biggest Risk Anchoring I Ever Took!Sep 2026It was my dream to sail here (Bora Bora)Aug 2026Chasing Sharks in Bora BoraAug 2026She Couldn't Stop Smiling 🥹Aug 2026

From Huub Vlogs — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.