Practical Sailorvideo
Teak and Holly Sole Repair The RIGHT Way! Sailboat DIY Projects
June 14, 2025 · 8 min · 17K views
What this video covers
Refinishing water-damaged teak and holly cabin sole veneer requires careful assessment of the depth of moisture penetration. On a 2006 Tartan 34, water intrusion from an open port light caused dark staining and bubbling in the thin veneer.0:47 Because the damaged panel was difficult to remove without disturbing vertical cabinetry, the repairer cut the panel at existing transition points to facilitate removal.2:40 After stripping the top layer of varnish with a heat gun and putty knife, the factory-applied Valspar UltraGuard Premium Conversion Varnish was sanded down using 150-grit sandpaper.3:09 Remaining dark stains were treated with oxalic acid, applied in two stages and allowed to dry overnight between applications to bleach the wood.4:48 Once clean, the surface was sealed with System 3 S1 Sealer, a low-viscosity two-part epoxy, and finished with three coats of Interlux Goldspar satin polyurethane varnish.5:40 Proper surface preparation and patience with wood bleaching are essential for restoring stained teak and holly veneer to factory condition.
Boats in this video
More from Practical Sailor
From Practical Sailor — see the channel’s boat, crew, and every analyzed video.
The Sailing Directory Newsletter
One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.