BoatsCarter 37 (1 Ton)

Carter 37 (1 Ton)

Masthead Sloop · Fin With Rudder On Skeg · First built 1973

A production version of the 1973 One Ton Cup winner YDRA, featuring an extended wedge-shaped coach roof and interior.

Designed by Dick Carter, built by Olympic Yachts.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Fin With Rudder On Skeg

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her heavy displacement on a moderate beam gives 28 — a moderate, middle-of-the-road motion.

Comfort ratio 28
CoastalBluewater

1.92 — just under the 2.0 offshore line; her beam is modest for her weight.

Capsize screening 1.92
LightHeavy

298 — heavy for her waterline, built to carry stores and ride steadily.

Displacement / length 298
EasygoingPowered-up

16.4 — moderate power for her weight; steady, all-round performance.

Sail area / displacement 16.4
TenderStiff

41% of her weight is ballast — moderately stiff, a middle-of-the-road stability.

Ballast 41%

A capable cruiser that sits just inside the offshore line — coastal work with real passages in her.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
41.1%
Rig & sail area
Rig
Masthead Sloop
Ratios
SA / displacement
16.4
Displacement / length
297.6
Comfort ratio
28.1
Capsize screening
1.92
Hull speed
7.1 kn
Pounds / inch immersion
1210
Hull
Hull type
Fin with rudder on skeg
Construction
Fiberglass
Ballast type
Lead
Production
Years built
First built 1973
Designer
Dick Carter
Builder
Olympic Yachts

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Swan 3711.13 mSame hull familyNear-identical lengthAn IOR 1-ton racer also marketed as the Palmer Johnson 37, featuring a masthead rig and a skeg-mounted rudder
Irwin Yachts 37-111.28 mSame hull familyNear-identical lengthA masthead sloop designed by Ted Irwin as a no-compromise cruiser, featuring a fin keel and skeg-mounted rudder
Hunter Marine 3711.28 mSame hull familyNear-identical lengthA John E. Cherubini-designed cutter featuring a fin keel and spade rudder, built for stable cruising since 1978
Pacific Seacraft 3711.25 mSame hull familyNear-identical lengthOriginally launched as the Crealock 37, this cutter features a 38% ballast ratio and a hull speed of 7.06 knots
Tartan Marine 37211.34 mSame hull familyNear-identical lengthA 1988-1993 masthead sloop featuring a deep 2.08-meter fin keel and a spade rudder for performance-oriented cruising
Pearson Yachts 3611.14 mSame hull familyNear-identical lengthA William H. Shaw-designed masthead sloop built for the IOR One Ton rule, featuring a fin keel and skeg-mounted rudder

The family

Related models

The designs closest to hers — usually the rest of the builder's range, sometimes the same hull sold under another name.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories, from everywhere.

One email from the fleet — boats newly added, videos newly analyzed. No noise.

Report an issue