BoatsHeritage 1 Ton

Heritage 1 Ton

Masthead Sloop · Fin keel, spade rudder · First built 1975

A Charles Morgan Jr. IOR one-tonner designed to reflect the competitive design shifts of the mid-1970s

Designed by Charles Morgan Jr.

LOA
Beam
Draft (max)
Displacement
Hull type
Fin w/spade Rudder

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her heavy displacement on a moderate beam gives 25 — a moderate, middle-of-the-road motion.

Comfort ratio 25
CoastalBluewater

2.01 — right around the 2.0 line, the edge between coastal and offshore.

Capsize screening 2.01
LightHeavy

277 — heavy for her waterline, built to carry stores and ride steadily.

Displacement / length 277
EasygoingPowered-up

18.4 — plenty of sail for her weight; lively and quick to respond.

Sail area / displacement 18.4

A balanced, easily-driven cruiser — comfortable and forgiving for coastal work.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Rig & sail area
Rig
Masthead Sloop
Ratios
SA / displacement
18.4
Displacement / length
277.1
Comfort ratio
25.1
Capsize screening
2.01
Hull speed
7.1 kn
Pounds / inch immersion
1201
Hull
Hull type
Fin w/spade rudder
Construction
Fiberglass
Ballast type
Lead
Production
Years built
First built 1975
Units built
20
Designer
Charles Morgan Jr
Builder
Heritage Yacht Corp

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Pearson Yachts 3611.14 mSame hull familyNear-identical lengthA William H. Shaw-designed masthead sloop built for the IOR One Ton rule, featuring a fin keel and skeg-mounted rudder
Pearson Yachts 36-211.13 mSame hull familyNear-identical lengthA 1980s production masthead sloop with a high-aspect fin keel and spade rudder, optimized for performance cruising
Hallberg-Rassy 3511.13 mSame hull familyNear-identical lengthA shallow-draft fin-keeler with a 1.3-metre draft, built for coastal cruising and ease of access to shoal anchorages
Hunter Marine 3711.28 mSame hull familyNear-identical lengthA John E. Cherubini-designed cutter featuring a fin keel and spade rudder, built for stable cruising since 1978
Oyster Marine 37 Heritage11.28 mSame hull familyNear-identical lengthA Holman & Pye designed masthead sloop built for offshore stability with a skeg-mounted rudder and conservative sail plan
Swan 3711.13 mSame hull familyNear-identical lengthAn IOR 1-ton racer also marketed as the Palmer Johnson 37, featuring a masthead rig and a skeg-mounted rudder

The family

Related models

The designs closest to hers — usually the rest of the builder's range, sometimes the same hull sold under another name.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories, from everywhere.

One email from the fleet — boats newly added, videos newly analyzed. No noise.

Report an issue