Sailing Zephyr IV · vidéo

Ce que couvre cette vidéo

Refurbishing a leaking heat exchanger on a 30-year-old Volvo Penta engine requires removing the unit from a confined space, stripping corrosion, and resealing the end caps.0:03 To remove the exchanger, close the raw water seacock, drain the freshwater coolant, and disconnect the four coolant and seawater pipes.0:50 After removing the mounting bolts, clean the barrel and end caps with wire brushes and paint remover, then use chemical metal filler to repair dents on mating surfaces.5:08 Flatten the end surfaces on a flat glass plate with abrasive paper to ensure a proper seal.5:26 Reassemble the unit with new gaskets and O-rings, using silicone grease on all mating surfaces to prevent leaks.7:08 Secure the seawater pipe connections with the manufacturer-specified retaining plate to prevent them from vibrating loose.17:26 If leaks persist after reassembly, the barrel may be deformed, requiring a replacement unit.18:29 Using silicone grease on gaskets and mating surfaces is essential for achieving a watertight seal on older, potentially uneven heat exchanger components.13:16

Bateaux dans cette vidéo

Plus de vidéos de Sailing Zephyr IV

Why Cowes Can Be A Sailor’s Nightmare (And How To Fix It)sept. 2026I Took the BLUETTI Elite 100 V2 on a boat – Here's What Happenedaoût 2026Day in the Life of a Solo Sailor at 82 : Cowes to Poolejuil. 2026Boat Toilet Not Working? I Replaced the Jabsco Pump at 82!juil. 2026

De Sailing Zephyr IV — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.